glue intake control (Gelierprobe)

water quench

water quench useable space:	deep-drawn, laser welded stainless steel-vat, length x width x height: 468 x 356 x 238 mm
housing:	structure stainless steel material 1.4301, stainless steel flat top cover, digital microprocessor-PID-regulation up to 95,0°C using "no contact" switch, tenth degree precise digital reference input and display of current data (LED), fully integrated self-test-system, malfunktion-display, over-temperature safety device, device is safety tested
dimensions:	length x width x height: 468 x 356 x 238 mm
netto weight:	ca. 11 kg

Darroven Darroven UNB100 Darrbalance Darrbalance

The Darroven und balance are made for the Darrprobe according to DIN 52183

stove:	Solide construction. Steel housing, powder-coated, stainless steel interior. Heating is done by heating element wich will be placed below the chamber floor. The monitoring system consists of an hydraulic safety thermostat with calibrated scaleadjustment. Overheating protection, temperature display. The entire housing is made for continuous operation, safe and thermoisolated.
electronic compactbalance:	precise, handy - fast adjustment of precision - calibratorweight included - stainless-steel balanceweight - easy 4-button operation - power supply by battery or AC adaptor 230 V.

GTH 400 fast-digital-pocket-thermometer

features:

• suitable to use as glued joint thermometer
• battery operation
• measurement range –50…+1150°C
• resolution 1°C
• sensor interface 2-pin norm-flatplug (thermostrainless)
  compatible for all NiCr-Ni-sensors
• 3 1/2-digit, 13 mm high LC-Display
• work temperature 0 - 45°C
• power supply 9V-battery type IEC 6F22 (included in delivery)
• battery lifespan ca. 700 hours of usage, battery change indicator in display
• accessory: thermo wire sensor for glued joints and/or surface sensors

download:

productsheet (PDF, 44kb)

accessorylist (PDF, 150kb) sensorlist 1 (PDF, 252kb) sensorlist 2 (PDF, 260kb)

device for RPM and speed determination
as well as for measurement of length

• The handy device operates in two diffrent modes: optical (without contact) and mechanical (using an adaptor and diffrent measurement attachments)
  
  
  

use to monitore the laminating pressure

working range:	0 – 100 kN, scale 2 kN with analogue index, manometer NG 100, measurement chain complete adjusted, measurement precision +- 1% v. SE
optional:	with two connection plugs, length 100 mm or with flexible CU-connection 2 m length

JAS cuvette-test formaldehyde

equipment for internal monitoring of gluelam formaldehyde emissions according to MAFF

• acryl-closet plus cover with circular seal
• volume ca. 38 litre
• acrylbasin with cover for distilled water
• download description cuvette-test (PDF, 28kb)

Lasa 30 - laboratory photometer for routine-analylis

determination of formaldehyde concentration in gluelam according to
MAFF for internal quality assurance

• LangeNET® and data mobile*
  
• battery operation possible
  
• reference beam technology
  
• auto-zero-adjustment, cuvette-test, pipette-test
• possibility to develope own methods
  
• measurement store for 100 values
  
• use of special filters possible
  
• extinction measurement, transmission measurement, measurement of concentration with a factor
  
• input of linear von linearen calibration curve
  
• display of time and date
  
• RS-232-interface
• download: short manual (PDF, 808 kb)
  

infrared thermometer

features:	data hold for short time data storage °C/°F-switchable laser which can be switched off adjustable alarm setup min-/max-/avg measurement backround illuminated additional contact-temperature measurement with optional K-type-sensor
measurement range:	–50 bis +750°C (resolution 0,1°C - precision +/- 2°C or 2%)
optic:	13:1
response time:	< 1 s
emission ratio:	adjustable 0,1 to 1,0
power supply:	9V block battery
dimensions:	180 x 106 x 48 mm (gun shape)
weight:	ca. 250 g
included in delivery:	device with bag, battery and manual

hydromette M 2500

microprocessor controlled timber moisture und temperature indicator - data storage - interface to connect with a PC or printer - big 4 line matrix-display - work range 4 bis 100% wood moisture or –30 to +170°C - special calibration for licensed gluelam construction (DIN 1052) - approved by the Otto Graf institute in stuttgart - precise moisture measurement in trimmed timber (up to 180 mm in diameter) in veneers and measurement of air and material temperature, single or group measurement and data storage - guided operation and malfunction message

important features and technical data:

• length: 190mm x width: 115mm x height: 56mm - weight: 460g without accesories
• data storage of 3000 timber moisture values and 3000 temperature values including date and time
• characteristic curves of 250 timber kinds are stored in fixed memory
• direct connection to a PC or printer to transmit the data
• automatic temperature compensation of the timber-moisture-measurement values utilizing a connected timber temperature sensor or by manually entering the values
• statistic interprtation of the measurements by min, max, avg values
• power supply: 9-V-block battery or Ni-Cd-akkumulator or 12-V AC-adaptor (optional).

(device ships without accesories)

measurement range: timber moisture: 4–100% depending on the resistor-measurement-method temperature 1: –30 to +170°C depending on the used sensor

accesories: timber moisture measurement electrodes (6) temperature measurement electrodes (10) flexible Pt-100 temperature sensors (5)

hand marking punch for timber identification

innovative hand marking punch with tenon - suitable for use in a moulding press - punches 3 - 10 digits in gluelam, timberconstructions, balks etc.
Each whell has 11-sides with numbers / letters and a blank engraved. The last wheel can be engraved as block wheel according to customer requirements. All the wheels can be rotated back and forth manually - automatic locking device for a cleaner typeface - a removable cap protects the blow ergonomic handle shock.

• New classification according to DIN 1052-1, para 14
• The font height is selectable between 8 and 10 mm.
  
• Download product sheet (PDF, 32kb)
  

rotary type holder

rotary type holder for the labeling of Glulam on a planing machine (according to DIN 68140-1, para 8) intended to host the exchangeable segment types for endless marking, suitable for fitting to thicknessers - consisting of the typeholderwheel, as well as the type clamp segment - changing the segement types is easy and goes very quickly - rollerbody made of burnished steel - special designs on request

tt is possible mount single and block segment types of partial and complete assembly according to customer requirements

specifications:

• burnished steel roller body
• roller body dimensions: max. 300 mm, width, depending on the font height, with a bore according to your shaft, with keyway
• segment types (see above, steel types) made of alloy tool steel, rapidly changeable
• font height: 2 - 10 mm, to 1,5 mm sublime graved
• gravure: individual types 0-9, A-Z or blocks, as well as blank types and signs according to customer requirements

documentation of the production data for glued parts according to DIN 1052 proof A, B and D